Had my sportwagon sele for a few months now, had a brake light circuit fault just after getting it but cured that with help form you guys, but unfortunately have developed a new problem - only over the last day or so -
The car started to struggle to change gear, (usually 2-3 or 1-2, or when coming to a stop at a junction) it had a few goes then flashed "n" at me, a change up or down got it in the end, it then started to creep when in 1st and r, until this morning...
Now it won't go into "1" or "r" with the engine running, but all gears will select when key is at mar.
Have tried re-cal using alfadiag, to no great effect. However have to say alfadiag is great, and managed to diagnose the clutch adjustment was at 35mm, (should be 28-28.5mm I believe)
So I duly adjusted this with the aid of the guides on here (thanks guys!), which took my amateur hands a few hrs, did a re-cal, started her up....and I got "1" and "r" ok! However after only a few changes (with the engine running and the car stationary) the "creep" re-occured, then a couple more changes and then no engagement of "1" or "r"!!! I've checked the level of oil seems fine,
The pump does run, as in you can hear it when you open the door or make a few changes, I just wonder if it is struggling under load. The alfadiag test checks out ok, but thats without the engine running.
I have a pump already (panic from my last fault!) so I'm gonna try it in the morning, just wonder if any of you veterans have opinions on it before I tear my hair out! Sorry for the long post....