was working on a car today replacing the cam belt.
When the owner drove off he called me after 5 miles or so saying that the
YELLOW ABS symbol + the RED (!) symbol had come on.
He returned ot me & I plugged in the laptop & using KWP71 I could not connect to ABS system.
I thought it was a blown fuse so I removed the ABS fuse [ 60amp ] & checke dit, wa sok & then re-insert.... lo-behold the yellow abs light went off.
bad connection we thought. We went for a drive & after 1/2 the error light came back on.
Back to the garage & no connection possible with ECU unitl we pulled the 60amp fuse & reinserted it.
So from an inital power up its ok, until the car is driven. + now the speedo don;t work wither
As an aside, possible indication of the true problem:
when the driver sdoor is open the info centre also dispalys that the boot is open & i', wondering if the info center is defective or loose wiring.
Also the air bag system is disabled showing
error codes 01, 12, 0B + 0C, as i posted in a previous post.
any one able to offe rme advise i'd truely appreciate it.
The cars owner live 80 miles away so he is now gone home.