Re: Wipers failed - help required.
I took mine apart today, I wanted to paint the scuttle panels anyway, thought i may as well see if i could see whats wrong with mine,
after not seeing anything obvious on the 'speed controller' i belled out the 3 leads to the motor and found 1 open circuit, i pulled the windings out and found the green wire brush stuck fast in its holder (not contacting the comm)
I freed this off, checked readings, put the motor back together (without linkage) and quickly tested on the car.
I will reassemble with shiny newly painted scuttle panels and try in anger, but its looking promising.
(anyone wishing to take the motor apart will need a soldering iron to remove the circuit board , its held in by 3 soldered posts forming contacts to the parking contact cam, the posts are all in the same half of the board)