<blockquote><font size="1" face="Verdana, Helvetica, sans-serif">quote:<hr /><font size="1" face="Verdana, Helvetica, sans-serif">Originally posted by pyros:
<strong>Ok , thx for the reply's . I have looked around on the internet and this is what i found .
The booster in pin says to the radio , there is a Bose installation on . Dismount the cable and you have the EQ function ( with all the settings like rock ,... ) .
Second thing i found , and i don't know if it's true or not , when you have the cable , the outgoing speaker cables are reduced strength . So if you have the Bose s*** on , and you dismount the cable you have to be carefull because the amp of Bose can be broken due to high import levels .
The first thing seems normal for me . They ( Blaupunkt ) are not going to make a different EEprom for the different versions . I don't believe this , it is way economical to make all the same and put a connector cable on all models . When powered do this , when not powered to that .
The second thing looks a little bit weird for me , Why reducing ??? If it can accept high signal import or it can't . The radio itself has no pre-out . I asked BP about it and the second thing they say it's not true . The outgoing level is always the same height and is always speaker level .
So for everybody , it looks worth trying it but set the speaker level at minimum . If you dismount the Bose and put something else inside , try it . I'm going to try it...</strong><hr /></blockquote><font size="1" face="Verdana, Helvetica, sans-serif">I'm going to try to fool the radio as well
But I can imagine fekking up the Bose because the speakers are designed for the Bose amp WITHOUT additional EQ settings frown