Re: Heater fan/Climate control fan
Fan is positioned behind the glovebox, the fuse is located in the engine bay fuse box and is rated at 40A.
Check for power on the pink (may be red) wire at the fan motor, it should be permanently live (+12V), check for an earth on the other wire (should be orange according to my diagram) when the ignition is on, engine running and fan switch turned up fully, if you probe both fan motor wires you should get 12V give or take a Volt. If you are getting a good reading there then you may have fan motor trouble, fit a new one, if there is not a good reading you should suspect the speed control device (located nearby) or wiring or switch. Plugs on fan motor circuits (the high current circuits anyway) have a tendancy to get hot and burn, check for burnt plugs and cut them out and solder round them. Electrical faults are hard enough to diagnose in person but nigh on impossible via the internet, hope this is some help. PM me with your findings if you want more advice, I own a business specialising in vehilcle electrical systems