Fantastic I'll try it the minute the WAIT message disappears...one last question if I may...is it as simple as pressing the 1-6-5-2 keys on the radio or is it the first key once the second key six times the third key five times etc like some car radios...I hope that makes sense
Alfa 937 CD
7 645 327 316
Alfa 937 CD Radio Code & Decoding Service
Alfa Romeo 937 CD
Blaupunkt 7 645 327 316
As originally fitted to the :
Alfa Romeo 147
If the display continually shows "WAIT" then the unit may be codelocked and will need to be left switched on up for up to two hours to reset before another code entry attempt is possible. If it does not reset after this time, or the display shows "CANCHECK" , then the unit will need to be sent to us to be reset and reprogrammed for use in your car, full details of this service can be found below.
This stereo is electronically paired to the engine management system of the vehicle it came out of using very sophisticated CAN-BUS system technology. When it is first powered up, it will communicate with the vehicle, and a message of "WAIT" will appear whilst this process is in operation. If communication has been successfull, it will prompt for the code number to be entered. However, if removed and refitted into a different vehicle other than the original one, it will not recognise the coded CANBUS signals of the new car, and will instead display an error message of "CANCHECK". Full details of our "CANCHECK" reset and reprogramming service can be found below.
Code Entry as Follows:
Switch Radio On - Display Shows
" CODE " then " - - - - "
Enter CODE in the order it is read :
For Example, To Enter Code 1234
Press Preset 1 then 2 then 3 then 4
The Code will Enter Itself Automatically