Tin worm attack ...
AO Gold Member
Join Date: Jan 2003
Location: United Kingdom
Re: Torque settings 2.0l T/S
Mains: 2.4-2.6 + 100 degrees
Big-ends: 2.4-2.6 + 60 degrees
Crankshaft Pulley: This is the one with four M8 bolts ... 2.4-2.9
Behind that is the Toothed Drive Pulley (M16 left hand thread): 34.0-37.8!
These are DaNM so x10 for Nm. So 340-378Nm for that pulley bolt!!
I wasn't sure about the toothed drive pulley but this is what is says in elearn and DTE.
Last edited by gazza82; 22-10-08 at 18:46.