JTS airbox - Alfa Romeo Forum
You are currently unregistered, register for more features.    
Thread Tools Search this Thread
(Post Link) post #1 of 1 Old 16-10-08 Thread Starter
Status: Hopeful but confused
AO Member
JayCee's Avatar
Join Date: Oct 2008
Location: Ireland
County: Laois
Posts: 127

Member car:

156 2.0 JTS

JTS airbox

Changed the airfilter today on my 2.0 JTS .. no probs with the bolts .. but a bit tight for space . then i discovered that some of the fuse connectors unclip from the fuse holder.

I replaced the tatty looking old filter with a nice clean original one ..

My Jts had a cone, not a huge restriction but its is a bit smaller at one end. It came out however .. needed to take the horseshoe type clip off the MAF and pull the MAF off the top of the airfilter housing to get at it .

Whatever the real or imagined gains to be had by doing this ..I doubt i will notice anything .BUT ! .....Refitting the cover with the cone out was much easier so if it doesent make anything worse, that makes the job easier in the future .
JayCee is offline  

Go Back   Alfa Romeo Forum > Supported Alfa Romeo Models > Technical & Vehicle Assistance > Alfa 147, 156 & GT

airbox , jts

Thread Tools Search this Thread
Show Printable Version Show Printable Version
Email this Page Email this Page
Search this Thread:

Advanced Search

Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

For the best viewing experience please update your browser to Google Chrome