Banned for not
following the site
Join Date: Feb 2008
Location: United Kingdom
Re: 156 Cutting Out
To stop the squeal you'll need to strip the brakes and copper grease up the pads and carriers.
The cutting out is either going to be cured by doing an ECU reset, cleaning the throttle body or replacing the TPS/IAC on the side of the throttle body.
To reset: disconnect the battery for 15 mins, reconnect and turn the ignition to MAR for 90 secs, then to OFF for 90 secs, now start the car without touching the throttle, allow to idle for 5 minutes and then go for a drive starting off easy for 5 minutes and then pushing harder for 5, this will relearn all the sensor data and charectaristics of the engine within the ECU and should dtop the cutting out.