Re: 147: hard to change the cambelt ?
and which tool i need ?
Cam locks for your engine type
RIBE no. 7 (I think) sockets or keys OR Torx T40 (both short and long)
Torx T30 key or socket for variator solenoid
Allen keys 5 and 6 mm
Sockets and spanners in sizes 10, 13, 15, 19 mm (I only use six-sided sockets).
A homemade tool for the variator and the camshaft pulleys
A steel pin, 8mm diameter, ca. 10 cm long (4”)
A bench vise
Thread locking compound (Loctite) medium and extra strong
Non-hardening gasket compound, non-silicone!
Lots of brake cleaner, tissue, rags, brushes etc.
less more ?