Re: Cruise Control Problems
I've just made mine longer! Having just replaced the clutch master cylinder I noticed the cruise control was no longer working. Guessed I must have c**ked it up myself but wasn't sure how or where. I found this thread on the Forum and there's the answer! The switch plunger on the clutch pedal was too short. I dismantled the switch and then saw that the plunger is adjustable on a spring ratchet so I just reassembled it with the plunger in the longest position, put it back and when I let the clutch pedal back up it pushed the plunger back in on the ratchet to the correct length. Problem solved.
Obviously when replacing the master cylinder I had accidently pushed the plunger too far into the switch. By the way, the switch is a nasty piece of minimilist engineering, dismantle with care!