AO Platinum Member
Join Date: Aug 2003
Location: London, England
Re: salespeed gearbox problem.pls help
First steps are:
make sure the Selespeed fluid level is OK.
clean the big electrical connector for the Selespeed actuator with a good electronic contact cleaner.
(the connector is below the MAF sensor near the thermostat. To open the connector you will need to pull up a plunger on one end.)
When the engine wouldn't start, was it turning over and not starting? Or not turning over at all?
If the system can't get neutral, it will not allow the engine to turn over.
Last edited by David C; 26-06-08 at 21:57.