Lusting after a
Join Date: May 2006
Re: GT/147 A-pillar creak
Thanks a million!
Its not actually anything to do with the A-pillar as it creaks when you remove the A-pillar cover.
Having removed the fuse box cover and manipulated the dash area I could get it to creak without much pressure. So as suggested I narrowed this down to the bolt on the far right of photo 2 in the link you sent (but being in the UK this is the drivers side!). Its accessible if you remove the air vent carefully. I removed the screw plus metal and rubber washers and gave a good spray with silicon lube and inserted some felt between the metal bolt and the metal washer. So far so good until it dries out!