AO Gold Member
Join Date: Sep 2002
Location: The Netherlands
Re: 156 diagnostic cable + mileage unit change
Alfadiag not working is mostly because the ECU is not in the list, what ECU does your 156 have ?
pin settings are important, VAG may have diferent functions on the pins.
this are the right pin settings for Alfa
quote from anoher thread:
I just tied pin 3 to 7itogether. Pin1 = ABS, Pin 3= Airbag, Pin 4 &5 =gnd, Pin 7= ECU, 8= Keycode controller, Pin 9 = Climate control, Pin 11= Alarm controller,Pin 16 = +12V. In fact I connected Pin 1,3,7,8,9 &11 all together in case a newer version of Alfadiag comes up with diagnostics on more controllers. The configuration is I2C so it does not matter. Each controller has its own address. I have used AlfaDiag on all the supported ECU,s with no problems at all.
Rarebear 'fastest piston engine airplane in the world' 4000 hp twinspark (!) radial engine.
Thta's what we call an ENGINE>>>>