Alfa Romeo Forum banner

Blackline Alloy Original Fitment Dimensions

1K views 4 replies 2 participants last post by  _The_Editor_ 
#1 ·
Hey all!

Seemingly a simple question, but one that I couldn't definitely answer through forum trawling and general googlery - What are the fitment dimensions (offset & width) of the original Blackline alloys?

Finding info that says ET 33 to ET 35, and 7.5 J to 8 J... So anyone got some definitive answers for me?

Sizing up some wheel spacers to bring my current aftermarket alloys (cheers previous owner!) back out to at lease the original clearance from the hub uprights.. My aftermarkets are 8J ET38 5x100 (fitted with wobble bolts) with 58.1 spigot rings.. So the inner shoulder is running a little closer to the uprights... and I found some harsh edge wear on the NSF inner shoulder, and corresponding witness/rub marks on the uprights...

Will get the tracking checked this week to make sure it's still spot on, but I want to try and bring the wheels out a bit!

Once I've got some appropriate spacers, I'll sort out whether I need new bolts too!
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top