How to remove the V6 starter motor bolt
How to make a spanner that can undo the starter motor bolt.
Get a long 13mm ring spanner. I used a Teng Tools 300mm double-end spanner, 13mm one end, 11mm on the other.
Make two 90 degree bends in the spanner. (I used an oxy-acetylene torch to make a narrow zone cherry red and then made the bend).
1. First bend at the 13mm end, 25mm from the centre of the ring.
2. Second bend 170mm from the first bend, in the opposite direction so the spanner now looks like an “L”.