Join Date: Mar 2016
County: -North Shropshire
147 clutch pedel wont stiffen
I bought an 05 147 jtd which needed a clutch which i've changed but ive run into trouble as the clutch pedel wont stiffen when Im bleeding the system, Ive put a new Slave cylinder on and i have a clear piece of pipe from the bleed nipple into a container full of brake fluid, I pump the clutch pedel and the reservoir empties and there's no air bubbles in the bleed pipe but the pedel wont get hard even though ive used a litre of Fluid when topping up.
Ive checked the Master cylinder and that's dry inside the footwell and the other side in the bulkhead the R clip is in tact on the clutch pedel and is working the master cylinder, All the pipework is dry and there's no leaks so why cant i get the pedel stiff ?