Alfa Romeo Forum banner

GTA Mod

Tags
mod
903 views 4 replies 3 participants last post by  gazza82 
#1 ·
Just spent 2 hours trying to do the GTA intake pipe mod on my ts and gave up so hard when its on the floor with hardly any space - need it on a ramp so be doing that next weekend at work :)
 
#3 ·
Hey mate got it straight from an alfa dealer best thing to do is get the registration of a gta and ask for the intake pipe off the airbox in the bottom of the bumper with the fixings it cost me £30 but I had to wait a week for them to come from italy.
 
#4 ·
£30! Only cost of £17 including all the other bits you need to mount it. Also, easy to do on axle stands, don't need ramp.
 
#5 ·
Parts prices have jumped recently ... with the €/£ exchange rate.

It's easy enough on stands ... getting the old airbox resonator out isn't easy as it's just a bit larger than the gap, but the bumper can be flexed a bit.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top