Re: 146 2 questions
My 146 Boxer didn't have the boot release, but as the wiring loom is shared with the higher spec models the wiring and relays are wired in. I replaced the panel above the ashtray to one from a Cloverleaf with the boot release switch. I plugged in the blanked off connector behind the dash to the button, and when you press it you can hear the relay click. The wiring for the solenoid again is in the tailgate so you can just plug the motor in. This is also the case for the front fogs if you do not have those. You just need to run a cable from the blanked off connector behind the headlamps down to each fog lamp.As far as the wipers go, I think they have a mind of their own! But being an alfa you should be thankful that they workat all, so maybe you should just leave them as they are!