Re: No card code only master key.. Help
Hi again Tara,
When you turn on ignition, does the key code light come on then go off?.
The advice is still the same, if the engine died during running, then its not the immobiliser.
I suggest you check for +12v on ecu pins A16 & A18 with ignition on.
Also check immo pins 3 & 8 for 12v with ignition on.
Probable fault is poor connections around engine relay, connections, fuse and connections, rotted wiring.
In the unlikely event of these voltages being present the immo is at fault.
Yes same as before you need 3 unique keys to load into immo.
You do not need the code card it only contains the emergency start for immobiliser, the profile code for key blade and maybe the remote code/s.