Re: burned light in dashboard
Yep exactly as above...
Theres a screw at the left hand side of the passenger side airbag panel (or blank panel as I have) which you will need a small stubby phillips screwdriver for..
The panel then simply pulls off (its clipped in with i think 5 plastic clips), be carefull tho as they are quite delicate clips..
Then remove all x3 of the knobs, which is done by getting a thin flat headed screwdriver under the bottom of the knobs - they should slide out..
There will be 1 screw behind each of the large knobs - 2 screws in total behind the knobs
There is a screw behind the indicitator stalk and 2 more screws behind the airbag/blanking panel next to the temp comtrol knob that you just took off
There are x2 bulbs behind the panel which comes out.