Re: Heater Not Working HELP!!
Well guys, once I took the cover off which goes around the matrix and started my engine, I got a face full of water! It turns out that the valve on the end of my heater matrix had a crack in... It looked like it had been leaking for a while as there was a build up of dried rusty water around the area.. I pulled the carpet back to find that the footwell was swimming in water.. NOT GOOD!
I then proceeded to take out the rest of the heater box which is a ball ache when you have to disconnect the hoses in the engine bay (which is not made very clear in the step by step guide left on the 145 forum!!)
To get the matrix out you have to dismantle the whole box so it will slide out, there was no other way to do it.
Anyway, I now need to find somewhere I can get a new matrix from with a valve on the side!
Whats the best way to dry out the floor, any ideas?