I've followed the instructions found elsewhere on the site to get a fault code readout by grounding pin one of the ABS sensor.
Seems to be working, only now I'm a little unsure of how to interpret the results.
The read as follows:
ABS light flashes once, small pause, then flashes twice. This sequence is repeated three times.
ABS light flashes 4 times, pause, then flashes 6 times. This sequence is repeated three times.
After that, the whole thing starts again.
I've seen the fault code table, but am not quite sure of how it relates to my readings.
(Car is a 146 2.0 BTW)