Help ! Recently bent the drivers door on White 145 Cloverleaf.
I know white is hard to find so any colour door would be acceptable.
Any tips on door removal ...
Help ! Recently bent the drivers door on White 145 Cloverleaf.
I know white is hard to find so any colour door would be acceptable.
Any tips on door removal & fitting ?
Just as important - anyone got a door they want to sell ?
Located near Cambridge
I have never taken a whole door off but the bit in the middle of the door (the brake bit which holds the door open when its windy) iv taken off before..
To get the middle bit off, there are 2 allen head screws holding one end of arm onto the car, and if you want to remove the end which is on the door, there are 3 I think 10mm small gold coloured bolts on the opposite side to the allen head screws.
Hope this helps
