Alfa Romeo Forum banner

Double DIN?

Tags
din double
2K views 3 replies 3 participants last post by  kdb car audio 
#1 ·
If you take out the stereo head unit and the little storage tray below it, is that gap big enough for a double DIN unit? Got my eye on a snappy little thing but aint buying it if it dont fit

Ta :D
 
#2 ·
I seem to recall from my 145 days that the mounting angle is too steep meaning there wasn't enough depth for a unit to fit in the bottom space. Might be worth a measure though with the dimensions of the double din you have in mind.
 
#4 ·
correct the angle is to steep. in the past at kdb car audio if the mech and the mother:cool:and fit without the chassis. make shure you heat sink the power ic though or it overheats. bit complex for diy but looks great when its done. although we do not know of a current double din unit that does not have a lower mounted motherboard. hope that helps.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top