Alfa Romeo Forum banner

156 rear brake disk guards

Tags
disk guards
976 views 6 replies 4 participants last post by  gazza82 
#1 ·
Hi everyone,

does anyone know wher i can buy the gaurds for my 156 rear disks they are pretty rusty and need replacing

Cheers,

Colin
 
#6 ·
yeah the the drivers side rear one, there was a load of rust on the wheel and i thought the pads were shot but i changed the pads last night and they wern't too bad but the gaurd was falling to bits, there is a couple of holes on it!! a bit surprised to be honest as its only a 05 plate and the other 3 just have surface rust.

do you need to take the hub off or is it just screwed on?

i think i might just put it to the garage up the road to get it done
 
#7 ·
Problem will be the small bolts holding the shield to the hub will probably snap off as they tend to rust in quickly ...

Depending on the shape of the shield, and most importantly the hole in the middle, the hub probably will have to come off .
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top