View Single Post
Old 30-05-2004   #8 (Post Link)
JaB
AO Member
 
Join Date: Jul 2003
Location: uk
Posts: 738

Member car:

'86s3,GTV,147

Re: Spider wont start :(

OK...

I found terminals 1 & 15

There is current at both, when the ignition is ON and when the engine is cranking.. there is no spark.

I've checked the resistances on 1/15 there is about 200 Ohms

On the HT lead I get no reading at all

The fuel system is pressurising, the relays are relaying, and all fuses are fine. I've checked the erath point at the back of the block and all is fine there.

I'm thinking I should replace the coil?

JaB
JaB is offline  
Reply With Quote