[Conkers]

Looks like it turned out nice, not bad for a first time attempt....

What were the guides like? Are you changing them...?

And a good tip for voluming the chambers is to use a syringe rather than a jug, if you dont have a burette. A piece of perspex with a hole drilled in close to the edge of the chamber, seal it with a thin smear of grease, likewise to seal the valves... dont forget to blow the spark plugs dry if you mess up or need to recheck any of them. And try to be consequent with the method and amount of grease you use.... aim to get them within 0.2cc.

Mike.

ps... Bruce Forsyth voice... Didn't he do well! ;-)