|
I have tried something different with my TS. I took off the inlet to the airbox, which is the part which would be replaced by the V6 version. This is a large box with baffles in it. It is basically designed to funnel air into the airbox and reduce the noise on full throttle.
First I ran it just like this - too loud. Then I removed the plastic tube from the inside of the baffle box. This is like a perforated tube. Still a little bit too loud. Next I fitted the baffle material back over the plastic tube. Now I have a nice induction roar under full throttle and maybe a bit more power - all for free.
Alfa 156 2.5 V6
Cosmos Blue Metallic + Tan Leather, 17” GTAs, 225/45 Michelin PS2's, Full Zender body kit, GTA Headlights, Eibach springs, Bilstein dampers, Novitec Anti-roll bars, Brembo calipers, 20 Groove discs, DS2500 pads, Squadra ECU, 45mm intake runners, Carbon Intake pipe, Novitec Twin DTM exhaust, Front strut brace, Aluminium undertray
Alfa 156 2.5 V6 Qsystem ..........Red + Red Leather
Alfa 156 Selespeed .....Silver + Red Leather
www.alfastorm.com
|