View Single Post
Old 09-07-2008   #6 (Post Link)
symonh2000
AO Gold Member
 
symonh2000's Avatar
 
Join Date: Dec 2005
Location: Carterton, Oxfordshire
Posts: 8,955
Re: 156 starting issue

Its an easy fix. The sensor is located underneath the starter motor, so st the right rear of the engine if looking at the front of the car.

The connector for the sensor is brown and clipped on the inlet manifold, you may find it easier to follow the wire down to the sensor.

The sensor is held in place with a M6 socket cap bolt so you will need a 5mm Allen key to undo it.
symonh2000 is offline  
Reply With Quote