Especially for Stu....reminds you of a song Eh.
Did the anti roll links on the Mondeo a few years back when it failed its Mot as the link was broken. Expected problems but it was a 10 minute job.
Advisory on Lacey so I think just do it.
Nuts well rusted and once cleaned off it spins in the bush..ie the whole thing turns....No access at all compared to the mondeo.
New discs in boot just awaiting the correct front discs.
DSCF0103.JPG
Top nut AFTER CLEANING
DSCF0104.JPG
Bottom nut AFTER CLEANING
DSCF0105.JPG
The link rod (60628255 and 60628284)
DSCF0106.JPG
spring has seen better days thats the next task.
DSCF0107.JPG
Used bottle jack to raise susp to gain access to top nut.(Top Tip otherwise I cant see how you get it OFF)
DSCF0108.JPG
Trying to source new link rods and will do it all at one time.
Anyone did this themselves before and if so any problems or was it easy.
This is my first time at the rear suspension and in my opinion an Italian designers mother has put too much cheese on his pizza before bedtime
Oh I long for the days when life was oh so simple.
Sprayed with WD40 to see if it helps when I get them to slacken.
Pomeo