Alfa Romeo Forum - View Single Post - intake

dusan · 13-05-2008

First I have question for you: will you apply some closed air induction system like BMC-CDA or K&N Apollo (better for performance) or you wish to use original air box (cheaper solution). In both cases better way required flexible pipe (because of simple bending and placement). This flexible pipe should be connect the input of the induction system (old or new) and place with cold air feed source. The best cold air source place is behind the front grill (just under the number plate). I have 147JTD (same or similar grill as your 147 1.6 t.spark) and I will to apply BMC-CDA model 85-150.
Good luck in your efforts. Dusan

13-05-2008	#3 (Post Link)
dusan Newbie Join Date: Feb 2008 Location: Novi Sad, Serbia Posts: 45 Member car: 147 1.9 JTD 8v	Re: intake - cold air feed questions First I have question for you: will you apply some closed air induction system like BMC-CDA or K&N Apollo (better for performance) or you wish to use original air box (cheaper solution). In both cases better way required flexible pipe (because of simple bending and placement). This flexible pipe should be connect the input of the induction system (old or new) and place with cold air feed source. The best cold air source place is behind the front grill (just under the number plate). I have 147JTD (same or similar grill as your 147 1.6 t.spark) and I will to apply BMC-CDA model 85-150. Good luck in your efforts. Dusan Last edited by dusan : 13-05-2008 at 08:41.