Alfa Romeo Forum - View Single Post

Moose · 22-10-2007

Hello,

We're facing a rather annoying problem with my dad's Fiat Multipla, model 2005. It is using the 1.9 JTD (115Bhp, 205Nm torque) engine.

After chiptuning ( 140Bhp, 270Nm torque ), the clutch is slipping ( weak clutch spring ) and juddering ( weak springs in the 2 mass flywheel ). Is it possible to change the clutch and flywheel by the ones used in alfas ( 147 / 156 ), or are there any other solutions?
( downtuning is not quite an option

)

I've heard the clutches are interchangable, but I've only read about this once and I need a bit more certainty

Thanks in advance!!

22-10-2007	#1 (Post Link)
Moose Newbie Join Date: Jan 2007 Location: Switzerland ( Bern ) Posts: 46 Member car: Alfa Romeo 147 GTA	1.9 JTD clutch Hello, We're facing a rather annoying problem with my dad's Fiat Multipla, model 2005. It is using the 1.9 JTD (115Bhp, 205Nm torque) engine. After chiptuning ( 140Bhp, 270Nm torque ), the clutch is slipping ( weak clutch spring ) and juddering ( weak springs in the 2 mass flywheel ). Is it possible to change the clutch and flywheel by the ones used in alfas ( 147 / 156 ), or are there any other solutions? ( downtuning is not quite an option ) I've heard the clutches are interchangable, but I've only read about this once and I need a bit more certainty Thanks in advance!! "Alfas are like Russian hookers: insanely pretty and willing beyond the ken of man, but you're going to get a rash!"