Alfa Romeo Forum - View Single Post

edward · 03-09-2007

Peter & TB,

That was exactly the question I had in mind. Then, if you buy the 20mm bar one can always tighten it up, as desired over time, but with the 18mm one it will run out of stiffness before the 20mm. I accept that 'going for the max' or at least having that capacity is not often the correct thing, but 20mm at softest setting would seem like a reasonable starting point would it not.

By the looks of things Pax and I would welcome your advice.

03-09-2007	#42 (Post Link)
edward AO Member Join Date: Dec 2003 Location: Bristol Posts: 427 Member car: 156 GTA sw & 156 GTA	Re: Front anti roll bar diameter? Peter & TB, That was exactly the question I had in mind. Then, if you buy the 20mm bar one can always tighten it up, as desired over time, but with the 18mm one it will run out of stiffness before the 20mm. I accept that 'going for the max' or at least having that capacity is not often the correct thing, but 20mm at softest setting would seem like a reasonable starting point would it not. By the looks of things Pax and I would welcome your advice.