Alfa Romeo Forum - View Single Post

philmiles83 · 30-07-2007

Hi Guys,
I had the dual circuit brake master cylinder replaced on my 1977 Spider 2000 Veloce a few weeks ago as the old one was sticking. However, on my first drive the brakes failed - pedal to the floor, only working when I pumped the pedal hard. I took it back to the garage, and the general concencus is that they must still have air in them. Two week later of bleeding, they are no better at all. Has anyone had the same problem, or does anyone have any suggestions at all? Am deperate now, especially as there appears to be a Sun in the sky!

30-07-2007	#1 (Post Link)
philmiles83 AO Member Join Date: May 2007 Location: Sleaford, Lincs Posts: 132 Member car: 1977 Spider 2000 Veloce	Further Barke Problems Hi Guys, I had the dual circuit brake master cylinder replaced on my 1977 Spider 2000 Veloce a few weeks ago as the old one was sticking. However, on my first drive the brakes failed - pedal to the floor, only working when I pumped the pedal hard. I took it back to the garage, and the general concencus is that they must still have air in them. Two week later of bleeding, they are no better at all. Has anyone had the same problem, or does anyone have any suggestions at all? Am deperate now, especially as there appears to be a Sun in the sky!